NEMA34 Closed loop stepper motor with driver and 3M cables / JK86HS78-4208
Basic Info
Model No.: JK86HS78-4208
Product Description
Nema34 closed loop Stepper Motor with Driver and 3M cables / JK86HS78-4208
Specifications:
Model No. | Step Angle | Motor Length | Current /Phase | Resistance /Phase | Inductance /Phase | Holding Torque | # of Leads | Detent Torque | Rotor Inertia | Mass |
( °) | (L)mm | A | Ω | mH | N.m | No. | Kg.cm | g.cm | Kg | |
JK86HS67-5904 | 1.8 | 67 | 5.9 | 0.28 | 1.7 | 3.4 | 4 | 0.8 | 1000 | 1.7 |
JK86HS67-2808 | 1.8 | 67 | 2.8 | 1.4 | 3.9 | 3.4 | 8 | 0.8 | 1000 | 1.7 |
JK86HS78-5504 | 1.8 | 78 | 5.5 | 0.46 | 4 | 4.6 | 4 | 1.2 | 1400 | 2.3 |
JK86HS78-4208 | 1.8 | 78 | 4.2 | 0.75 | 3.4 | 4.6 | 8 | 1.2 | 1400 | 2.3 |
JK86HS115-6004 | 1.8 | 115 | 6.0 | 0.6 | 6.5 | 8.7 | 4 | 2.4 | 2700 | 3.8 |
JK86HS115-4208 | 1.8 | 115 | 4.2 | 0.9 | 6 | 8.7 | 8 | 2.4 | 2700 | 3.8 |
JK86HS155-6204 | 1.8 | 155 | 6.2 | 0.75 | 9 | 12.2 | 4 | 3.6 | 4000 | 5.4 |
JK86HS155-4208 | 1.8 | 155 | 4.2 | 1.25 | 8 | 12.2 | 8 | 3.6 | 4000 | 5.4 |
driver :
2-phase Hybrid Stepper Servo Driver HSS86
1. Instruction
1.1 Overview
HSS86 is 2 phase nema 34 series hybrid stepper servo driver. It adopts new generation 32 bit DSP and vector control technology, which can avoid the stepper motor losing steps and ensure the accuracy of the motor. The torque reducing is much lower than open loop stepper motor when it is at higher speed. The high speed performance and torque are enhanced in a great extent. Meanwhile the current control is based on the load, that can reduce the motor temperature rising effectively, then can extend the using life of the motor. The build-in place in position and alarm output signal can help the upper monitor to monitor and control. The function of position ultra difference alarm can ensure the machine work safely. The closed loop system is an ideal improvement and a good replacement of open loop system, Besides that, it also have some function of AC servo Motors, but price is just half of AC servo.
1.2 Features
1.2.1 Stepper motor closed loop system, never lose step.
1.2.2 Improve motor output torque and working speed.
1.2.3 Automatic current adjustment based on load, lower temperature rising.
1.2.4 Suitable for all mechanical load conditions (include low rigidity belt pulley and wheel), no need to adjust gain parameter.
1.2.5 Motor work smoothly and low vibration, high dynamic performance at acceleration and deceleration.
1.2.6 No vibration from high speed to zero speed
1.2.7 Drive nema 34 series 4N.m, 8N.m, 12N.m closed loop stepper motor.
1.2.8 Pulses response frequency can reach 200KHZ
1.2.9 16 kinds microsteps choice, highest 51200microsteps/rev.
1.2.10 Voltage range: AC24~80V or DC30V~110V
1.2.11 Over-current, over-voltage and position ultra difference protection function.
1.3 Applications
Closed loop stepper system can be applied to all kinds small automatic equipment and
Instruments, such as engraving machine, special industrial sewing machine, stripping machine, marking machine, Dispensing machine, cutting machine, laser phototypesetting, graph plotter, NC machine, automatic, assembly equipment and so on.
2. Electrical, mechanical, environment Parameter
2.1 Electrical Parameter
Voltage range | AC20~80V or DC30~110V |
Peak current | Peak 8.0A(current change according to load) |
Logic input current | 7~20mA |
frequency | 0~200KHz |
Suitable motor | 86HSE12N,86HSE8N,86HSE4N |
Encoder lines | 1000 |
Insulation resistance | >=500MΩ |
2.2 Environment Parameter
Cooling method | Natural or radiator | |
Operating environment | Operating Occasions | try to avoid dust, oil, corrosion gas |
Operating temprature | 0~50℃ | |
Operating humidit | 40~90%RH | |
virbration | 5.9m/s²Max | |
Storage temperature | -20℃~65℃ | |
Weight | About 560g |
2.3 Installation Dimension 152mm*98mm*53mm
3.7.Wires for Encoder
Standard wire length for encoder is 3 meters. ( Wire length can be customized.)
About Our Packing:
Company Show:
Except Brushless Dc Motor, we can also supply all kinds of stepper motors, dc motor coupling, Breakout Board,Power Supply and so on.
we can provide samples
if you have any problems in using, we can teach you.
if there are any problems with the quatily, we will try our best to solve it for you.
if you need more information . please contact with us ,
More Quantity . more discount !!!
Product Categories : Close Loop Stepper Motor > NEMA34-86mm NEMA24-60mm Stepper Motor